I. Yuxi Plastic Company Accident: Missing Emergency Lighting in Warehouse Sounds Safety Alarm

On September 16, 2025, an object strike accident occurred at China Yuxi Plastics Co., Ltd., resulting in 1 death. The accident investigation report showed that as early as June 17, 2025, during a safety inspection by the regulatory authorities, a major hidden danger of “missing emergency lighting fixtures in parts of the raw material warehouse” was discovered in the enterprise, and the enterprise was ordered to rectify within 15 days. However, the enterprise failed to rectify effectively, and the hidden danger still existed when the accident happened.

This incident directly points to the core pain points of industrial warehouse lighting: the lack of emergency lighting leads to a sharp increase in operational risks in nighttime/low-light environments, difficulties in identifying potential safety hazards, and obstacles to evacuation and rescue when accidents occur, sounding the alarm on lighting safety for all industrial warehousing enterprises.

II. Disadvantages of industrial warehouse lighting

Hard requirements for safe production:

FIFA and building codes impose stringent regulations on venue lighting: the power supply must be supported by dual-circuit redundancy + UPS zero-flash stop, the emergency power switchover time must be ≤ 5 seconds; international event venues must restore a basic illumination of ≥ 100lux within 30 seconds of a power outage, and the central horizontal illumination of World Cup-level venues must reach ≥ 2000lux with vertical illumination ≥ 1500lux.

Common problems of traditional lighting systems:

• Inadequate coverage of emergency lighting, with lighting dead zones in some areas
• Lack of maintenance for lamps; damaged ones are not replaced in a timely manner, failing to provide lighting when needed most
• No intelligent sensing function; lamps operate at full power even when unoccupied, resulting in high energy consumption and accelerated light decay
• Traditional lamps have low protection levels and are prone to damage or failure in dusty and humid environments
• Complex installation and wiring, making renovation and upgrading difficult with long construction periods

III. Core solution: Strip mining work lights

Addressing the pain points of industrial warehouse lighting, our product takes dual power supply, intelligent emergency response, high reliability, and multi-functionality as its core. It comprehensively meets international standards and eliminates the risk of lighting interruptions.

1.Intelligent sensing system, 4-9 meters of mobile sensing without dead angles

It is equipped with a built-in high-sensitivity microwave sensor module, which can be automatically triggered by human movement within a range of 4-9 meters, realizing “the light turns on when someone comes and dims when someone leaves”. This ensures that sufficient lighting is automatically provided when someone is working in any corner of the warehouse, avoiding the hidden danger of “insufficient lighting” from the source.

2.Intelligent Emergency System, Standby Equipment on Standby at All Times

It supports adjustment of warm light/neutral light/cold light (three levels of color temperature). In emergency situations, it can switch to 5000K high-brightness cold white light to improve visibility in warehouse operations; combined with three levels of power adjustment (100%/75%/50%), it can be forced to run at full power in emergency mode to ensure that the illuminance in key areas meets the standard.

3.High-Reliability Design, 50,000 Hours of Ultra-Long Maintenance-Free Operation

IP65 high protection level, effectively dustproof and waterproof, suitable for harsh environments such as dusty and humid warehouses; adopts 576×2pcs 2835 high-quality LED lamp beads, constant current drive, with a nominal service life of more than 50,000 hours, avoiding lighting loss caused by “unreplaced damaged lamps”.

4.Flexible Functional Configuration, Adapting to All-Scenario Lighting Needs

The input voltage ranges from 180-265VAC at 50/60Hz, adapting to power grids in different regions; the line-to-line surge protection is 10kV and line-to-ground is 6kV, which resists voltage fluctuations in the power grid and ensures the stable and uninterrupted operation of the lighting system.

IV. Core advantages of the product: reducing costs and increasing efficiency in an all-round way

Energy-Saving and High Efficiency, 70% Reduction in Operating Costs

The light efficiency reaches 130-150LM/W. The 220W product can directly replace the 600W traditional HID lamp, saving more than 70% energy. The intelligent sensing function realizes automatic dimming or turning off during unmanned periods. With a lifespan of 50,000 hours, it can achieve no replacement for more than 10 years, saving both electricity bills and maintenance costs.

Flexible configuration to meet lighting needs in all scenarios:

Color temperature adjustable: 3000K warm light / 4000K neutral light / 5000K cold light, with one-key switching between warehousing operations, inspection, and emergency modes

· Power adjustable: three levels of 100%/75%/50%, adjust brightness as needed to maximize energy saving

· Light output optional: 30°/60°/90°angles, meeting the needs of local key lighting and large-area floodlighting

· Can be used in series: maximum series power 1200W/5 lamps, suitable for integrated lighting layout of large warehouses without additional wiring

Easy to install, significantly shortening the construction period:

65mm ultra-thin design, lightweight and space-saving; supports both suspension and ceiling-mounted installation methods, with a built-in 1.5mm² dedicated cable, no additional wiring required for series installation, enabling quick completion of warehouse lighting renovation.

V. Adaptable to multiple scenarios, not limited to industrial warehouses

Industrial Factories/Warehouses：

IP66 protection grade + IK08/IK09 impact resistance grade, resistant to dust and vibration; 1500mm long lamp body + multiple light angles to achieve uniform lighting in high and large spaces, saving more than 70% energy in industrial scenarios.

Commercial Premises：

3000K-5000K adjustable color temperature, adapting to the different atmosphere needs of restaurants, supermarkets and shopping malls; intelligent dimming adapts to passenger flow changes, and the long service life reduces maintenance interference during business hours.

Public Facilities：

For schools/hospitals/stations and other scenarios, the emergency lighting function ensures evacuation safety; flicker-free design protects eyesight, with a color rendering index CRI>80 to restore colors realistically, meeting the professional lighting needs of classrooms, operating rooms and other places.

VI. Choose Us, Lock in Lighting Safety Guarantee

The reliability of the lighting system directly determines the smooth progress of activities and personnel safety. A minor fault may cause huge economic losses and brand impact.

Our Linear High Bay Light is based on international standards, solving lighting pain points in an all-round way from power supply guarantee, equipment performance to intelligent management, and providing an integrated lighting solution with high reliability, low energy consumption and easy management for sports venues, industry, commerce and public facilities.

Contact us now to get a free professional evaluation and customized plan for your lighting system, and make lighting failures a thing of the past!

• Website ：www.dusaled.com
• Email ：sales01@dusaled.com
• Phone ：86-755-84661199
• WeChat ： 18928474001